HDS-14 14,000lb 4 Post Lift by BendPak
Handling heavy-duty vehicles in a bustling workshop comes with its challenges. From ensuring safety under massive weights to accommodating vehicles of various sizes, finding a lift that meets these demands isn’t easy. Relying on outdated or underperforming equipment can slow your workflow and compromise safety, which no professional garage can afford.
The BendPak HDS-14 is the solution to these challenges, delivering unmatched strength, safety, and versatility. With a lifting capacity of 14,000 lbs., extended runways, and heavy-duty aircraft cables, this four-post lift is built to tackle the heaviest tasks. Safety features like automatic locks, a secondary lock system, and a slack-cable device ensure peace of mind, while the pneumatic push-button release and electric-hydraulic power system enhance efficiency. Add optional rolling jacks or an extended-length model, and the HDS-14 becomes the ultimate tool for any professional service bay.
4 Post Lift HDS-14 Specification
- Lifting Capacity: 14,000 lbs. (6,350 kg)
- Rated Capacity per Axle: 7,000 lbs. (3,175 kg)
- Min. Runway Height: 7.5″ (191 mm)
- Max. Rise: 70″ (1,778 mm)
- Max. Lifting Height: 77.5″ (1,969 mm)
- Time to Full Rise: 60 seconds
- Overall Width: 130″ (3,302 mm)
- Outside Length: 213″ (5,410 mm)
- Overall Length: 242″ (6,147 mm)
- Height of Columns: 92″ (2,337 mm)
- Width Between Columns: 120″ (3,048 mm)
- Drive-Thru Clearance: 98″ (2,489 mm)
- Runway Width: 20″ (508 mm)
- Length of Runways: 197.5″ (5,017 mm)
- Width Between Runways: 34.5″ (876 mm) or 41.5″ (1,054 mm)
- Runway Centerline: 57.5″ (1,461 mm) or 64.5″ (1,638 mm)
- Outside Edge of Runways: 77.5″ (1,969 mm) or 84.5″ (2,146 mm)
- Minimum Wheelbase (Rated Capacity): 140″ (3,556 mm)
- Locking Positions: 15
- Lock Spacing: Every 4″ (102 mm)
- Motor: 220 VAC / 60 Hz / 1 Ph
- Noise Level: 45 dB
- Shipping Weight: 2,606 lbs. (1,182 kg)
- Shipping Dimensions: 209″ x 22″ x 29″ (5,309 mm x 558 mm x 737 mm)
HDS-14 14,000lb 4 Post Lift Special Features
- 14,000-lb. lifting capacity
- ALI Certified
- Extended runways for larger vehicles
- Dual-hub cable sheaves for reduced wear
- 1/2” heavy-duty aircraft cables
- Built-in lubrication for easy maintenance
- Integrated hydraulic flow restrictor for controlled descent
- Large base plates for solid foundation
- Safety locks automatically engage during rise
- Pneumatic push-button safety release
- Secondary lock system for added security
- Adjustable height locking positions for variable vehicle sizes
- Electric-hydraulic power system for dependability
- Longer approach ramps for low-clearance vehicles
-
Warranty:
- 5 Year – Lift Structure
- 2 year – Hydraulic Unit & Power Unit
- 1 Year – Electrical and Operating Components
- *Reasonable labor costs covered for first 12 months
BendPak HDS-14 Documentation
BendPak HDS-14 14,000lb 4 Post Lift Optional Item(Sold Separately)
- RJ7W 7,000lb Rolling Bridge Jack
- Extended-length model for larger vehicles
- Open-front design for easy front-end adjustments
Warehouse Pickup Locations: $600 Pickup Discount Available – Contact us for more information!
- Santa Paula, CA 93060
- Theodore, AL 36582
A – Min. Runway Height: 6.75” (171 mm)
B – Max. Rise: 71.75” (1,822 mm)
C – Max. Lifting Height: 77.5” (1,969 mm)
D – Overall Width: 131.75” (3,346 mm)
E – Outside Length: 213″ (5,408 mm)
F – Overall Length: 241″ (6,131 mm)
G – Height of Columns: 92” (2,337 mm)
H – Width Between Columns: 120″ (3,046 mm)
I – Drive-Thru Clearance: 98″ (2,482 mm)
J – Runway Width: 20″ (508 mm)
K – Length of Runways: 199″ (5,054 mm)
L – Width Between Runways: 34.5” (876 mm) or 41.5” (1,054 mm)
M – Runway Centerline: 54.5” (1,384 mm) or 61.5” (1,562 mm)
N – Outside Edge of Runways: 74.5” (1,892 mm) or 81.5” (2,070 mm)
Reviews
There are no reviews yet.